SPECIFICATIONS

Brand Name: other

Waterproof: No

Communication: AUX

Communication: USB

Communication: bluetooth

Speaker Type: Portable

Support APP: No

Category: Speakers

Use: home

Sound Mode: Stereo Sound Mode

Sound Mode: Standard Mode

Sound Mode: Other

Voice Control: No

Input Power(W): <25 W

Input/Output: Aux

Intelligent Personal Assistant: NONE

Code: XDG-96

Description

Start the party for the new XDG-96. With its high quality in songs and its modern designer. Cheer up the party with your RGB LED effects that interact with your sound!

Technical specifications

Bluetooth: 5.0

Distance: up to 10m

Driver: 2x Ø3"

Power: 2x5W RMS

Sensitivity: ≥ 60dB

Frequency of response: 100 ~ 18,000Hz

Battery: 2,400 mAh

Playback Time: @ 80% volume up to 2H

Recharge Time: Up to 3H

Power: DC 5V

Dimension (H X W X L): 28.5*15.5*15.0

Weight: 1162G

TWS

TWS is a function that allows you to connect another box to your device.

To use TWS mode, turn on the device and do not connect it to a Bluetooth device. Hold the Mode button until it sounds an audible warning that indicates that the XDG-96 will be available for connection. Repeat the process on another XDG-96 and wait for the connection between the devices.

RGB LEDs

The XDG-96 speaker has a LED system that reacts according to the volume of the music.

Switch between the 3 available lighting modes.

Entries available:

USB, SD Card, Microphone and one port for Micro-Usb 5V charging

Dashboard

1 - “LED” Click to change the mode of LED lighting. Click and hold for 3 seconds to turn on/off.

2 - “MODE” Click and switch between modes (BT, USB/SD and FM). Click and hold to turn TWS mode on/off.

3 - “Back/Volume down” Press once to back the music or station/Press and hold to lower the volume.

4 - “Play/Pause” In Bluetooth mode and USB/SD click to pause/play music. In FM mode click for automatic synchronization of stations.

5 - “Forward/Volume Up” Press once to go to the next song or station/Press and hold to increase the volume.

6 - “EQ” Click to change the mode of equalization.

Recommendations:

Clean with dry cloth, do not wet. Keep the product away from children.

Keep the product in a dry place without direct sunlight.

Do not place near a source of heat or water. Do not wash, wet or submerge in water.

Do not charge for more than 10 hours continuously, this action will reduce the battery life.

Charge the battery for up to 3 hours on first use to get a full charge.

Do not connect external amplifiers to the Speaker, risk of damage!!!

Do not use the speaker as a support or support for any object.

Do not open or make repairs to the speaker. Risk of electric shock and cancellation of warranty.

Solution of problems

Without power

Check if the button is in the “ON” position. If it is on, turn off the unit and plug in the power cord and recharge the speaker for at least 1 hour.

No sound when playing the music

Check if there is a connection to the played or Bluetooth device. Check that the volume is set to a minimum.

Memory card or flash drive with no sound

Remove and connect again.

Verify that the memory card or flash drive has compatible files.

Turn the speaker off and on.

Noise in the Speaker

The speaker has a noise-reduction system, but in some cases, the speaker produces a noise above the sound-reduction capacity of the speaker. If this occurs, disconnect and connect the device to the speaker.

Magnetism of sound box

The sound box has a powerful magnet that can cause magnetic interference in some devices. Keep the speaker at least 1 meter away from electronic devices, such as monitors and magnetic cards.